This is the E-flite 40-Amp Pro Switch-Mode BEC Brushless ESC V2. This ESC is high-quality, efficient, sensorless and has an integrated Switch-Mode BEC. It is capable of up to 40 amps continuous current when using 3- to 6-series Li-Po battery packs.. It has advanced programmable features such as low voltage cutoff, braking, timing and throttle input range.
Features:
- Up to 40 amps continuous current with proper air flow and 55 amps burst current (15 seconds)
- 5A continuous current, 5V Switch-Mode BEC Circuit (Proper cooling and airflow required)
- Stronger BEC for support of most 3-axis stabilization systems
- Drive up to 7 analog or 6 digital standard-sized servos with the BEC
- 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
- Finned heat sinks
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 3-cell Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 70% of battery starting voltage
- Programmable throttle input range
- Programmable soft start for helis and airplanes
- Auto motor shut down if signal is lost or there is interference
- Programmable timing—5 user-selectable ranges to use with a large variety of brushless motors
- Utilizes new smaller Mosfet technology to minimize weight
- Radio System Power ON /OFF Switch
- Prewired connectors—E-flite EC3 connector on battery input and 3.5mm gold bullet connectors on motor output leads
Specifications:
Amperage: 40-60
Brakes: Yes - Programmable
Connector Type: EC3
Input Voltage: 10.8V - 22.2V
Output Connector: 3.5mm Bullet
Programmable: Yes
Wire Gauge: 13 AWG
