The BLX100 100A waterproof ESC provides consistent power control and is 3S LiPo ready.
Fitted with a super-reliable EC5 connector and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX100 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 12AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
|Battery usage||2S LiPo (7.4V) or 3S LiPo (11.1) / 4-9 Cell NiMH|
|Low Voltage Cut-Off (LVC)||3.4V per cell|
|Thermal Protection Temperature||125°C / 257°F|
|Over-Voltage Protection||Over 12.6V|
|ESC Length||43mm / 1.69"|
|ESC Height||34mm / 1.34"|
|ESC Width||54.5mm / 2.15" (Including hold-down tabs)|
|ESC Weight||120g / 4.2oz|
|Receiver Wire Length||170mm / 6.70"|
|Battery Wire Length||125mm / 4.92"|
|Motor Wire Length (Including Connector)||200mm / 7.87"|
|Switch Length||110mm / 4.33"|
|Switch Width||12.8mm / 0.5"|
|Switch Height||18mm / 0.71"|
|Motor Bullet Connector Size||4mm / 0.16"|
|ESC Battery Connector Type||EC5|